• Everlast Power I-TIG 201

If you are looking for a professional level DC TIG/Stick welder, the Everlast Power i-TIG 201 offers unparalled features in an economical DC welder. The unit is fully featured, offering both high frequency start and lift start capability. When compared to other DC TIG/Stick welders, on the market, the Power i-TIG 201 competes favorably with similar welders in its class such as Invertec and Maxstar models at just a fraction of the cost. This unit, a replacement for the popular Power i-TIG 200, is widely used by professionals in specialty trades where heat control is important, such as gun smithery, or stainless fab shops, because of it's low amp start capability of just 5 amps and pulse feature which precisely controls the heat. The new DC Power i-TIG 201 definitely retains the analog feel of the original Power i-TIG 200. However, because it now incorporates digital control of the parameters, the result is a simplified internal plug and play design which helps to ensure reliability. Yes, the unit still retains all of the features of the Power i TIG 200 so if you are person who likes to have controls that you can eyeball and touch, it is likely to be a perfect fit in your shop.

Features & Benefits

  • Digital IGBT Inverter design incorporates simple analog look and feel
  • TIG output of 200A @ 35% Duty Cycle operating on 240V
  • TIG output of 125A @ 35% Duty Cycle operating on 240V
  • Dual Voltage capability allows unit to be used with 120V or 240V single phase service
  • Pulse function with fully adjustable parameters up to 250Hz
  • Digital display for accurate setting of amps.
  • Features Lift start and High Frequency modes for DC welding
  • 160A Stick weld function with arc force control can be used with welding electrodes such as E6011, E7018, and E7014 (Not E6010 capable)
  • 35 Series DINSE-style connectors
  • Consumable Starter Kit (Tungsten not included)

Standard Equipment

  • 12ft. Everlast 26-Series TIG torch with 35 Series DINSE-style connectors
  • Work clamp and 10 ft. cable with 35 Series DINSE-style connectors
  • Stick electrode holder with 10 ft. cable and 35 Series DINSE-style connectors
  • Argon regulator
  • Consumable starter pack (Tungsten not included)
  • 6ft. Input power cable with plug.

Optional Equipment

  • Welding Cart
  • Foot Pedal (22k)
  • Consumable Kits Including Gas Lens and Stubby Kits
  • 25 ft. Everlast Series 9 flexhead torch with flex cables and DINSE-style connector
  • 12 ft. Everlast 26 series finger amp control torch with DINSE-Styleconnector

Recommended Areas Of Use

  • Portable Welding Repair
  • Pipeline
  • Contstruction/HVAC
  • Trackside/offroad Motorsports repairs and fabrication
  • Production lines
  • Gun Smithery
  • Hobby/DIY

Recommended Metals

  • Steel
  • Stainless
  • Titanium
  • Copper
  • Chrome-Moly


IGBT Type Individual IGBT
Inverter Type Digital/Micro-controlled
Output Type DC Stick, DC TIG
Voltage/phase 240 1 PHASE
Max Rated TIG Amps 200 Amps
Max Rated Stick Amps 160 Amps
TIG Amps @ Rated Duty Cycle 200A/ 18V @ 35% Duty Cycle/40° C
Stick Amps @ Rated Duty Cycle 160A/26.4V @ 35% Duty Cycle/40° C
Max Inrush ( I1MAX ) Amps 27.5A
Maximum Rated (I1EFF ) Input Amps 220V: 17A
Stick: 70V
TIG Output Range DC 5A–200A/10.2V–18V
TIG Output Range AC N/A
Stick Ouput Range DC 5A–160A/ 20.2V–26.4V
Stick Function Adjustable Arc Force Control
Stick Hot Start Type Auto Adaptive Hot Start
6010/Cellulose Capable Limited to 6011
Minimum Amp DC TIG Start 5A
Minimum Amp AC TIG Start N/A
TIG Start Type HF/Lift TIG
TIG Start Type HF and Lift Start
Memory No
Start Amp Range Not Adjustable/ Pre-Set
End Amp Range Not Adjustable/Pre-Set
Upslope Time 0–5 Seconds
Down Slope Time 0–5 Seconds
Preflow time 0–5 Seconds
Post Flow Time 0–25 Seconds
TIG Pulse Yes
Standard DC Pulse Frequency .2–250Hz
Pulse Time On (Duty Cycle) 10–90%
Pulse Amp Range 5–95%
Remote Control 2T/4T
Foot Pedal Optional


Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.






Write a review

Note: HTML is not translated!
    Bad           Good

Everlast Power I-TIG 201

  • Brand: EverLast
  • Product Code: Everlast Power I-TIG 201
  • Availability: In Stock
  • $895.00

Over 70,000 welding supplies
Safe and secure shopping
Questions 0296 957 503