71
  • Everlast PowerTIG 325EXT

The PowerTIG 325EXT is built for superior industrial performance. With Digital microprocessor control over the Infineon IGBT inverter, and up to 320 amps of welding Power, the PowerTIG 325EXT packs the most punch of any AC/DC TIG welder in the Everlast line. The module design of the IGBTs creates a reliable platform designed for years of service. The unit is equipped with many features that improve its value in the shop. One of the features that is highly useful is the Advanced Pulse in AC which can greatly increase penetration while welding aluminium, and make it seem like you are welding with a lot larger machine than you are. Wave form control, AC frequency and AC balance control combine to round out the welder into a very capable Aluminum welder. However, the DC capabilities should not be overlooked either with plenty of features which includes a standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions. This model of PowerTIG 325EXT is available configured to operate on 415V 3 phase input power.

Features & Benefits

  • Digital microprocessor control
  • IGBT Power Modules increase reliability and performance
  • Operation down to 5 Amps DC and 10 Amps AC
  • 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
  • Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
  • Gapless, Solid-State High Frequency design reduces maintenance issues and improves start reliability
  • No hidden menus to access or complicated set up routines
  • Simplified menu design allows settings to be quickly selected and adjusted
  • Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
  • Pulse up to 500Hz in DC, 250 Hz AC
  • 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
  • Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance
  • VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding
  • 415V 3 phase input capability

Standard Equipment

  • 8-metre Everlast water-cooled 20 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
  • 8-metre Everlast gas-cooled 9 Series Flex-Head TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation
  • New style stick electrode holder with 10ft cable and 35 series DINSE style connectors
  • Heavy Duty Work clamp with 10 ft Cable and DINSE style connectors
  • New, redesigned compact foot pecal
  • New Everlast Regulator made from billet brass
  • Consumable starter kit (Tungsten not included)
  • 6 ft Power input cable

Recommended Areas Of Use

  • Fabrication/Production welding
  • Motorsports/Offroad
  • General automotive use
  • Prototyping
  • Shipyards
  • Pipelines
  • Farm
  • Industrial maintenance
  • Air Craft
  • Gun Smithing
  • Hobby/DIY

Specifications:

IGBT Type: Module IGBT
Inverter Type: Digital/Micro-controlled
Output Type: AC/DC TIG, DC Stick
Voltage/phase: 415V 3 Phase
Max Rated TIG Amps: 325A
Max Rated Stick Amps: 250A
TIG Amps @ Rated Duty Cycle: 320A/22.9V @ 35% Duty Cycle/ 40° C
250A/19.8V @ 60% Duty Cycle/ 40° C
200A/17.6V @ 100% Duty Cycle/ 40° C
Stick Amps @ Rated Duty Cycle: 250A/30V @ 35% Duty Cycle/ 40° C
200A/28V @ 60% Duty Cycle/ 40 ° C
160A/ 26.4V @ 100% Duty Cycle/ 40 ° C
Max Inrush ( I1MAX ) Amps: 19A @ 415V 3 phase
Maximum Rated (I1EFF ) Input Amps: 12A @ 415V 3ph
OCV: 70V (<24V with VRD)
TIG Output Range DC: 5A–325A
TIG Output Range AC: 10–325A
Stick Ouput Range DC: 20–250A
Stick Hot Start Amps: 0–100%
Stick Function: Adjustable Arc Force Control
Stick Hot Start Type: Adjustable Hot Start
Stick Hot Start Time: 0–2 Seconds
6010/Cellulose Capable: Limited to 6011
Minimum Amp DC TIG Start: 5A
Minimum Amp AC TIG Start: 10A
TIG Start Type: HF and Lift Start
TIG Start Type: HF and Lift Start
Memory: Yes
Start Amp Range: DC: 5A–320A
AC: 10A–320A
End Amp Range: DC: 5A–325A
AC: 10A–325A
Upslope Time: 0–25 Seconds
Down Slope Time: 0–25 Seconds
Preflow time: 0–25 Seconds
Post Flow Time: 0–25 Seconds
TIG Pulse: Yes
Standard DC Pulse Frequency: .1–500 Hz
Standard AC Pulse Frequency: .1–250 Hz
AC Advanced Pulse Frequency: .1–10 Hz
Pulse Time On (Duty Cycle): 5–95%
Pulse Amp Range: 5–100%
AC Frequency (Hz): 20–250Hz
AC Balance Range: 5–90%
AC Wave Forms: Advanced Square
Soft Square
Triangular
Sine
Remote Control: 2T/4T with Torch Amptrol settings
Foot Pedal: Standard

 

FREIGHT SYDNEY METRO ONLY. CALL FOR OTHER AREAS

COURIER SERVICES (IF SELECTED) TO CAPITAL CITIES ONLY. PLEASE PROVIDE ST ADDRESS FOR COURIER. NO PO BOXES.

Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.

Write a review

Note: HTML is not translated!
    Bad           Good

Everlast PowerTIG 325EXT

  • Brand: EverLast
  • Product Code: Everlast PowerTIG 325EXT
  • Availability: In Stock
  • $3,700.00


Over 70,000 welding supplies
Safe and secure shopping
Questions 0296 957 503