71
  • Everlast PowerPro 256Si

The Everlast PowerPro 256Si brings maximum power and performance to the table with its newly redesigned IGBT inverter design by featuring digital control. This increases reliability and accuracy. It's ideally suited for repairs and maintenance chores when space and portability on the job site or repair truck are real concerns. The welder features up to 250 amps of AC/DC TIG welding power, and a full 200 amps of stick welding power to handle almost any welding project or task. The plasma cutter also supplies up to 60 amps of power to cut or trim up any metal to complete the task and features the longer life PT/iPT 60 torch. The PowerPro series of welders from Everlast are designed for utility use and offer a good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.

Features & Benefits

  • All-in-one portability
  • Compact, yet powerful TIG welding/Plasma cutting features
  • Digitally controlled IGBT inverter improves performance, reliability and accuracy
  • Easy to use controls with touch pad control for process and feature selection
  • Quick change out of torches for easy change from TIG to plasma and back to TIG
  • Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting
  • OK-to-cut indicator lights up when minimum air pressure is present
  • Make regular, low dross plasma cuts on steel up to 5/8" thick with a maximum clean cut ability of 3/4"
  • Renown arc stability for TIG/Stick functions

Standard Equipment

  • Torch (Water cooled torch for PowerPro 226/256)
  • Foot Pedal
  • Consumable Starter Kit
  • Argon Regulator
  • Air Pressure Regulator
  • Air Pressure Gauge
  • Water Trap
  • 300 Amp electrode holder with cable
  • Plasma Cutting Torch

Recommended Areas Of Use

  • For use in areas where multiple processes are required for on-the-spot repairs or fabrication in shops or home garages.
  • Typically many motorsports enthusiast like to carry these units to the track for convenient and quick high quality repairs.
  • It is also an excellent choice for the person or business with space limitations or the portable repair business as both plasma cutter and welder are contained in one unit, reducing need to carry or store two or more units.

Specifications:

Process AC/DC GTAW-P, DC SMAW and PAC
Inverter Type DIGITAL IGBT Construction
Minimum/Maximum Rated Output TIG AC: 20A/10.8V – 250A/20V (± 3A)
DC: 5A/10.2V–250A/20V(± 3A)
Minimum/Maximum Rated Output Stick 5A/20.2V – 200A/28V (±3A)
Minimum/ Maximum Rated Output Plasma 20A/88V–60A/104V (±3A)
Start Type HF only (No lift TIG start available for this model)
HF Point Gap Adjustable .030�–.045�
TIG Duty Cycle @ Rated Amps/Volts 60% @ 250A/20.0V
100% @ 200A/18.0V
Stick Duty Cycle @ Rated Amps/Volts 35% @ 200A/28V
60% @ 160A/26.4V
100% @ 130A/25.2V
Plasma Cutter Duty Cycle @ Rated Amps/Volts 35% @ 60A/104V
60% @ 50A/100V
100% @ 40A/96V
Voltage Input (U1) Standard 220/240V; 50/60Hz 1 phase
Maximum Inrush Amps (I1MAX) 40A
Maximum Operating Amps (Rated Effective) (I1EFF) 32A
Maximum Air Supply Pressure (Plasma cutter) 90 psi from Air Compressor
Recommended Operating Pressure (Plasma cutter) 70–80 psi while air is flowing.
Recommended Minimum Air Compressor Size 5.3 CFM @ 90 psi, 95Litre tank
Gas Pre-Flow /Post Flow Time 0–10 Seconds/ 0–25 Seconds
Start Amps/End Amps DC: 5–250A/5–250A (±3A)
AC: 20–250A/20–250A (±3A)
Up/Down Slope Time 0–10/0–25 Seconds
AC Frequency Control 20–250 Hz
AC Balance Control 10–90% of Electrode Positive (EP)
Pulse Frequency Hz (Pulses Per Second) .5–250Hz
Pulse Amps (Ratio) 5–95%
Pulse Time On (Balance) 10–90%
Stick Arc Force Control 0–100%
Minimum Water Ingress Protection Standard IP21S
Efficiency >85%
Cooling Method One Single Speed Full–Time High Velocity Fan
Dimensions (approximate) 460H × 25W × 635L
Weight (Bare Unit) 30kgs
Minimum Storage/Minimum Operating Temperature Storage: –10°F/–23°C
Operating: 14°F/–10°C

Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.

 

FREIGHT SYDNEY METRO ONLY. CALL FOR OTHER AREAS

COURIER SERVICES (IF SELECTED) TO CAPITAL CITIES ONLY. PLEASE PROVIDE ST ADDRESS FOR COURIER. NO PO BOXES.

 

Write a review

Note: HTML is not translated!
    Bad           Good

Everlast PowerPro 256Si

  • Brand: EverLast
  • Product Code: Everlast PowerPro 256Si
  • Availability: In Stock
  • $2,650.00


Over 70,000 welding supplies
Safe and secure shopping
Questions 0296 957 503