• Everlast PowerPro 205Si

Features & Benefits

  • All-in-one portability
  • Compact IGBT Inverter design and low power consumption is ideal for portable use
  • Compact, yet powerful TIG welding/Plasma cutting features
  • Easy to use controls with simple selector switch for process changeover
  • Quick change out of torches for easy change from TIG to plasma back to TIG
  • Good duty cycle ratings for TIG, Stick, and Plasma
  • Duty Cycle indicator warns when thermal threshold has been exceeded and interrupts welding/cutting output until condition is resolved
  • Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting output until condition is resolved
  • OK to cut indicator lights up when air pressure meets minimum required operating pressure and interrupts cutting output when air pressure is too low
  • Low dross cuts on steel up to 5/8" with up to 3/4" maximum capacity (under ideal conditions)
  • Exceptional arc stability for TIG/Stick functions

Standard Equipment

  • 15ft. Everlast 26-Series air-cooled TIG torch with DINSE-style 35 series connector
  • Stick electrode holder with 10 ft cable and DINSE-style 35 series connector
  • 14ft. Everlast PT-60 Plasma torch with DINSE-style 35 series connector
  • Work clamp with 10 ft. cable and DINSE-style 35 series connector
  • Foot pedal
  • Argon regulator for TIG
  • Air Pressure regulator with water trap/filter (Note: This is not an air dryer. A separate, inline air dryer, supplied by the customer should be installed)
  • Consumable starter kit for TIG and Plasma (Does not include TIG tungsten)

Recommended Areas Of Use

  • Farm where portable repairs are needed and carrying multiple units is not an option
  • Motorsports/At the track/Offroad where quick repairs are often needed
  • For businesses that often need spot repairs and one-off projects completed

Recommended Metals

  • Steel
  • Stainless
  • Aluminium
  • Titanium
  • Virtually any weldable metal


IGBT Inverter Type IGBT
Voltage/phase 220/240 V 1 Phase
TIG output type AC/DC
TIG Start Type High Frequency Only
Pulse Yes, Adjustable
Plasma Cutter Arc Start Type Blow Back (Piston type)
PilotArc Yes
OK-to-Cut Indicator/Low Air pressure safety Yes
AC Frequency 20–250Hz
AC Balance (cleaning) 10–90%
OCV 85V TIG/Stick, 250V Plasma
Max Inrush ( I1MAX ) Amps 30A
Maximum Rated (I1EFF ) Input Amps 24A
TIG Output Amps/Volts @ Rated Duty Cycle 200A/18V @ 60% Duty Cycle
160A/16.4V @ 100% Duty Cycle
Stick Output Amps/Volts @ Rated Duty Cycle 160A/26.4V @ 35% Duty Cycle
130A/25.2V @ 60% Duty Cycle
100A/ 24V @ 100% Duty Cycle
Plasma Output Amps/Volts @ Rated Duty Cycle 50A/100V @ 35% Duty Cycle
40A/96V @ 60% Duty Cycle
30A/92V @ 100% Duty Cycle
TIG AC Amp/Volt Range 20A–200A; 10.8V–18V
TIG DC Amp/Volt Range 5A–200A; 10.2V–18V
Stick Amp/Volt Range 5A–160A; 20.2V–26.4V
Plasma Amp/Volt Range 20A–50A; 88V–100V
Start Amps DC: 5A–200A
AC: 20A–200A
End Amps DC: 5A–200A
AC: 20–200A
Down Slope Time 0–25 Seconds
Up Slope Time 0–10 Seconds
Preflow time 0–10 Seconds
Post Flow Time 0–25 Seconds
OverCurrent Protection Yes
Duty Cycle Protection Yes
Air Pressure OK Safety Indicator Yes
TIG Pulse Frequency .5–250 Hz
TIG Pulse Time On 10–90%
TIG Pulse Amp Range 5–95%
Stick Arc Force Control Yes, 10–100%
Torch Type PT/iPT 60
Recommended Cutting Air Pressure 75 PSI
Recommended Compressor Capacity 5.0 CFH @ 90 PSI/ 25 Gallon

Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.



Write a review

Note: HTML is not translated!
    Bad           Good

Everlast PowerPro 205Si

  • Brand: EverLast
  • Product Code: Everlast PowerPro 205Si
  • Availability: Out Of Stock
  • $2,250.00

Over 70,000 welding supplies
Safe and secure shopping
Questions 0296 957 503