• Everlast PowerPlasma 60S

Make a list of everything you want in a plasma cutter. Chances are that you'll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 60S. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop. The PowerPlasma 60S is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design. The unit has plenty of cut capacity with a recommended 20mm daily cut, a 25mm clean cut and a 30mm severance cut capability. The new iPT 60 torch is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 60S features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.

Features & Benefits

  • Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
  • Cuts virtually any type of metal with ease
  • Simple to use torches with inexpensive service parts and consumables
  • Commercial class, 60% Duty cycle at 60 amps
  • Clean, smooth cuts with the genuine iPT 60 Torch
  • Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
  • Pilot arc improves performance and cutting on dirty, painted, or rusted metals
  • 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
  • Front air pressure gauge allows quick verification of air pressure
  • Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
  • Adjustable postflow timer for maximum consumable life
  • IGBT modules from Infineon (Siemens) improve reliability and performance while reducing overall weight
  • CNC socket for CNC use on plasma tables (machine torch optional)
  • Suitable for use with 11,000 W "clean power" generators

Standard Equipment

  • iPT 60 Blow Back Style torch 4m
  • Work clamp with 3m cable and DINSE connector
  • CNC Connector
  • Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
  • Consumable starter kit

Recommended Areas Of Use

  • Cutting in all conditions where Oxy Fuel cutting is impractical, slow, unsafe, expensive, or otherwise restricted or undesirable.
  • Excellent choice for smooth cut requirements without warping metal from high heat input typical of Oxy fuel torches.


Voltage/phase 220/240 V 1 Phase
Output Amp/Volt Range 20–60A; 88–104V
OCV 240V
Max Inrush ( I1MAX ) Amps 41A
Maximum Rated (I1EFF ) Input Amps 32.4A
Duty Cycle At Rated Amps/Volts 60% @ 60A/104V
100% @ 50A/100V
Arc Start Type Blow Back (Piston type)
PilotArc Yes
Torch Type Italian designed iPT 60
CNC Interface Port Yes
Adjustable Post Flow Timer Yes
Gouging Light to Medium
Recommended Cutting Air Pressure 75 psi
Recommended Compressor Capacity 6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety Yes





Write a review

Note: HTML is not translated!
    Bad           Good

Everlast PowerPlasma 60S

  • Brand: EverLast
  • Product Code: Everlast PowerPlasma 60S
  • Availability: In Stock
  • $1,650.00

Over 70,000 welding supplies
Safe and secure shopping
Questions 0296 957 503